Buying in bulk? Scroll to the bottom to find out more.
Open an account online in under two minutes and start shopping at wholesale prices straight away.
Open an account online in under two minutes and start shopping at wholesale prices straight away.
Buying in bulk for a one-off project? Spend £240 (£200 + VAT) on the website and 45% comes off at checkout.
Buying in bulk?
Lino cutting tools, brayers and barens for relief printing, from carving your block to pulling the print. Our lino cutting set has a beechwood handle and five steel blades in a wooden box, and works on traditional lino and soft-cut sheets.
Rubber brayers come in widths from 5.5cm to 20cm, with an inking tray to roll the ink out on, a bench hook to hold your lino steady and wooden or plastic barens for printing by hand. If you're starting out, our lino printing kit brings it all together.
A V-shaped blade for fine lines and outlines, a narrow U-shaped blade for detail and texture, and a wide U-shaped blade for clearing larger areas. Our set has a V blade, U blades in 2mm, 3mm and 4mm, and a cutting knife. For a fuller explanation of each nib and when to use it, see our guide to the five lino cutting nibs.
A rubber roller that spreads ink in a thin, even layer, first on the inking tray and then across your block. Choose one close to the width of your block, so you can cover it in fewer passes.
Printing by hand without a press. Lay the paper on the inked block and rub the baren over the back in firm circles, covering every area so the whole design prints evenly.
A board that hooks over the edge of your table and holds the lino still while you cut. It keeps your free hand behind the blade, so you can cut away from yourself safely.